Restore and improve the reliability of your BMW S54B32 / S54 engines with the BMW S54 VANOS Delete Kit, a proven solution for a common BMW weak point. Engineered by 5150 AutoSport, this VANOS elimination kit is built to the standards demanded by high-performance and motorsport BMW builds.
Key Features
- Designed for BMW S54B32 / S54 engines
- Resolves a known BMW VANOS weak point
- Precision-engineered for reliable operation
- Improves long-term durability
- Designed as a direct-fit solution
- Supplied by 5150 AutoSport, trusted by BMW enthusiasts worldwide
Product Details
5150 Autosport S54 VANOS Elimination Kit
The 5150 Autosport VANOS Elimination Kit removes the factory dual VANOS system from the BMW S54, converting it to a fixed cam timing setup for maximum simplicity, consistency, and mechanical reliability.
This kit is designed for heavily modified engines, including supercharged and turbocharged builds, as well as hill climb, drifting, rally, and drag racing applications. It is particularly beneficial in combinations using ECUs that do not support dual VANOS control. In race environments where engines are consistently operated above 3000 RPM, the VANOS system provides limited benefit, making a fixed cam timing setup more stable and predictable.
The factory S54 VANOS system is known for a range of common issues, including:
- Rattling noise from the VANOS unit
- Loss of low-end torque and overall power
- Inconsistent or sluggish throttle response
- Rough or unstable idle
- VANOS-related fault codes and check engine lights
- Hesitation during throttle transitions
- Delayed or incorrect cam timing response
- Reduced high-RPM performance
- Limp mode activation in some cases
- Metallic noise indicating potential internal wear or damage
- Exhaust hub tab failure and solenoid-related issues
By locking the cam timing in place, this kit eliminates these VANOS-related failure points, including exhaust hub failure, solenoid malfunctions, and system noise. It also provides a stable foundation for more aggressive engine configurations, such as higher duration and lift camshafts, as well as oversized valve upgrades.
Built for extreme conditions, the 5150 Autosport VANOS Elimination Kit is intended for dedicated competition vehicles where durability, consistency, and mechanical simplicity are critical.
Important Notes on Eliminating VANOS
This modification is intended for track-only and race applications. Removing VANOS significantly changes engine behavior and may not suit all builds.
- Reduced Low-End Torque: VANOS optimizes cam timing across the RPM range. Eliminating it reduces low-end responsiveness.
- Best suited for engines operating primarily at higher RPM
- Not recommended for street-driven vehicles
For setup-specific guidance, consult your engine builder or work with one of our engine build advisors.
Kit Includes:
- (1) Billet VANOS Elimination Plate
- (2) Adjustable Camshaft Hubs
- (1) Block-Off Plug
- Uses OE O-rings and replaces OE oil supply valve
- Installation hardware included
BMW S54 VANOS Delete Kit Installation Instructions:
- Remove the factory VANOS assembly following the official BMW procedure.
- Install the sprocket hubs using the supplied M6 x 16 mm screws with Loctite. Torque to the factory specification.
- Install the cam sprockets and set cam timing according to the cam manufacturer’s specifications.
- Attach the cam sprockets to the sprocket hubs using the supplied M6 x 14 mm screws, Loctite, and washers.
- Install the supplied block-off plate to prevent oil flow into the original VANOS tube. We recommend replacing the O-rings with new ones during this step.
S54B30, S54B32, S54B33, S54B34, S54B35
BMW S54 Applications:
BMW 3 Series
2000-2006 E46 M3
BMW Z3 Series
2001-2002 Z3 M
BMW Z4 Series
2006-2008 Z4 M
Compatibility
BMW S54 Models
- BMW E46 M3
- BMW Z3 M Roadster / Coupe
- BMW Z4 M Roadster / Coupe
Why Choose 5150 AutoSport?
- Purpose-built BMW performance engineering
- Components developed for high-power, real-world durability
- Trusted by serious BMW engine builders
- Specialist knowledge of forced-induction and high-RPM builds
Why Buy from R44 Performance?
R44 Performance supplies premium BMW performance and engine-building components trusted by enthusiasts worldwide.
- BMW specialists
- Genuine 5150 AutoSport products
- Fast UK & worldwide shipping
- Expert product support
Upgrade your BMW S54B32 / S54 build with the BMW S54 VANOS Delete Kit — available now from R44 Performance.
Unless explicitly stated otherwise, all products sold by R44 Performance Limited are designated RACE ONLY and are solely for competition or off-road use limited to racing formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, may violate local, state, and Federal laws. R44 Performance Limited does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the responsibility of the consumer.
It is the responsibility of the customer to check with all federal, state local and environmental laws before ordering and installing a product. R44 Performance Limited is not responsible for any fees, fines or costs that a customer may incur as a result of failing to check with federal, state, local or environmental laws before ordering and installing a product.
We get a large number of custom orders and requests everyday, so as a result it is not always possible for us to keep every item in stock at all times in our warehouse. If you require the item urgently please contact our sales team here to check the stock before you make your purchase.
We totally understand if you're not certain a part will be compatible with your car, so we highly recommend contacting us here with your query. Our friendly sales team will then be in touch to confirm if this part is the correct part you are looking for.
All in stock products ship the same day if ordered before 2pm GMT
For out of stock items we will contact you with an estimated wait time if not otherwise specified above.
We offer worldwide shipping on all products. If upon receiving your product you wish to return; we offer a 30-day returns policy. For our in-depth returns information please follow the link. "R44 Returns Policy
All of our products come with a standard warranty of 1-3 years. This is dependant on the type of product however. For more details please see our warranty page here.
PLEASE NOTE
- Orders with both in-stock and backorder or out-of-stock products will be dispatched once all products are available to ship together.
- Contact our sales team if you want your parts fitted to your vehicle at our London workshop.
- Shipping estimates are based on courier delivery times and don't include time to despatch from our warehouse.





