MMX
MMX BMW Wheel Stud & Nut Kit (Set Of 20 Studs For MMX Kit Only)
IN STOCK WITH SUPPLIER. DESPATCH IN 3-5 DAYS.
Size
MMX BMW Wheel Stud & Nut Kit (Set Of 20 Studs For MMX Kit Only)
70mm single stud M14 x 1.25
R44 Performance HQ
Latif House, First Way, Wembley
Unit 4
London HA9 0JD
United Kingdom
Choose options
IN STOCK WITH SUPPLIER. DESPATCH IN 3-5 DAYS.
Size
IN STOCK WITH SUPPLIER. DESPATCH IN 3-5 DAYS.
Size
If you already have the MMX Performance Stud & Nut Kit, MMX also supply wheel studs and wheel nuts as replacements. These are ideal if you are adding spacers and want to change stud length, or if you are changing wheels that require either conical or ball seat lug nuts to be used.
These are all supplied as set of 20 pieces. Please note that these are only compatible with the MMX Stud and Nut Kit, not for any other applications. They apply for all cars with M14x1.25 nuts - from BMW F&G-Series and Mini F56 onwards.
(Wheel Nuts are also available)
PRODUCT SPECIFICATION
Two different stud lengths are available, depending on your fitment:
- 70mm Stud: No spacers, or up to 10mm spacer
- 80mm Stud: Spacers between 10mm to 20mm
SHORTER 70mm STUDS |
LONGER 80mm STUDS |
Thread length (Hub side): 13mm Thread length (Nut Side): 50mm Overall stud length: 70mm |
Thread length (Hub side): 13mm Thread length (Nut Side): 60 mm Overall stud length: 80mm |
FITTING INFORMATION
- Remove the wheels and clean the threads in the hub and the short ends of the new studs using a suitable solvent such as brake cleaner. Ensure the threads are totally free from dirt and grease.
- Before you fit the stud, check that the shank (the plain section between inner and outer threads) passes easily through the disc holes and you are not bottoming the stud on the brake disc.
- Coat the threads on the short end of the stud with a thin covering of Loctite Blue 2422 (high temp rated to 650°F - it’s important to use a high temperature-rated Loctite that exceeds hub temps).
- Using a 6mm Allen Key, screw the short end of the stud into the hub until you reach the shank.
- DO NOT OVERTIGHTEN THE STUD INTO THE HUB – TIGHTEN UP TO AROUND 30ft-lbs / 40Nm.
- Wait about three hours for the Loctite to go off fully and refit the wheels with the new nuts using 19mm socket. Lower the vehicle back onto the floor and torque the wheel nuts to the factory specification of the original lug bolts.
- Recheck the torque of the studs after 30 minutes of driving once the whole assembly has got hot.
Unless explicitly stated otherwise, all products sold by R44 Performance Limited are designated RACE ONLY and are solely for competition or off-road use limited to racing formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, may violate local, state, and Federal laws. R44 Performance Limited does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the responsibility of the consumer.
It is the responsibility of the customer to check with all federal, state local and environmental laws before ordering and installing a product. R44 Performance Limited is not responsible for any fees, fines or costs that a customer may incur as a result of failing to check with federal, state, local or environmental laws before ordering and installing a product.
We get a large number of custom orders and requests everyday, so as a result it is not always possible for us to keep every item in stock at all times in our warehouse. If you require the item urgently please contact our sales team here to check the stock before you make your purchase.
We totally understand if you're not certain a part will be compatible with your car, so we highly recommend contacting us here with your query. Our friendly sales team will then be in touch to confirm if this part is the correct part you are looking for.
All in stock products ship the same day if ordered before 2pm GMT
For out of stock items we will contact you with an estimated wait time if not otherwise specified above.
We offer worldwide shipping on all products. If upon receiving your product you wish to return; we offer a 30-day returns policy. For our in-depth returns information please follow the link. "R44 Returns Policy
All of our products come with a standard warranty of 1-3 years. This is dependant on the type of product however. For more details please see our warranty page here.
PLEASE NOTE
- Orders with both in-stock and backorder or out-of-stock products will be dispatched once all products are available to ship together.
- Contact our sales team if you want your parts fitted to your vehicle at our London workshop.
- Shipping estimates are based on courier delivery times and don't include time to despatch from our warehouse.