Eibach BMW G90 & G99 M5 Pro Kit Front Lowering Springs

Correct the uneven factory wheel arch gap on your BMW G90 M5 Saloon or G99 M5 Touring with the Eibach Pro-Kit Front Lowering Springs, part number E10-20-059-01-20-UK. Developed as a special front-axle-only kit, these springs lower the front of the latest-generation M5 by approximately 20mm while retaining the original BMW rear springs.

From the factory, both the G90 and G99 M5 have a noticeably larger wheel arch gap at the front than at the rear. Installing a conventional four-spring lowering kit lowers both axles, which isn't necessarily what every owner wants when the primary aim is simply to achieve a more balanced stance.

Following discussions with Eibach, its engineers assessed whether the shared G90/G99 front Pro-Kit springs could safely be paired with the original rear M5 springs. Eibach's engineering team confirmed that they do not expect the front-only configuration to cause an issue from a handling perspective, allowing this dedicated two-spring package to be offered specifically for owners looking to address the front ride height.

The result is a simple, targeted solution: approximately 20mm of front lowering, reduced front wheel arch gap and a more level overall stance without unnecessarily lowering the rear of the car.

Key Features

• Eibach Pro-Kit front lowering springs
• Special front-axle-only package
• Fits both BMW G90 M5 Saloon and G99 M5 Touring
• Approximately 20mm front lowering
• Designed to reduce the larger factory front wheel arch gap
• Retains the original BMW rear springs and rear ride height
• Front spring shared between Eibach's G90 and G99 applications
• Front-only configuration reviewed by Eibach's engineering team
• Designed to work with the M5's original suspension dampers
• Progressive Eibach spring technology
• Manufactured by Eibach
• Supplied as a pair of front springs
• Special UK kit
• Eibach part number: E10-20-059-01-20-UK

Why Lower Only the Front of the G90 & G99 M5?

Take a look at a standard G90 M5 or G99 M5 Touring from the side and one aspect of its stance immediately stands out: the front wheel arch gap is noticeably larger than the rear.

This can make the front of the car appear higher than the back, particularly when fitted with the factory wheel and tyre setup.

A conventional lowering spring package typically reduces ride height across both axles. However, if you're already happy with the factory rear ride height, lowering the rear as well can be unnecessary.

This Eibach package takes a more targeted approach.

By lowering only the front axle by approximately 20mm, the springs reduce the excess front arch gap while leaving the rear ride height unchanged. This creates a more visually balanced side profile without dramatically lowering the entire vehicle.

Developed Following Consultation With Eibach

This isn't simply a pair of springs removed from a full kit without consideration for how the change could affect the vehicle.

Eibach produces separate complete Pro-Kit applications for the G90 M5 Saloon and G99 M5 Touring, but both applications share a common front spring.

Following discussions about the possibility of using these front springs independently, Eibach consulted its engineering team to assess whether the spring rates were sufficiently compatible with the original BMW rear suspension.

The engineers concluded that they would not expect an issue from a handling perspective when fitting the G90/G99 front springs while retaining the original rear springs.

This allowed the springs to be packaged as a special two-spring kit specifically for this application.

Approximately 20mm Front Lowering

The Eibach front springs provide approximately:

Front axle: -20mm
Rear axle: Standard factory ride height

Rather than pursuing the lowest possible ride height, this setup is intended to correct the visual imbalance between the front and rear wheel arch gaps.

The approximately 20mm reduction brings the front wheels further into the arches, giving the latest M5 a more purposeful stance while maintaining the original ride height and practicality at the rear.

As with any lowering spring, the final measured drop can vary slightly according to individual vehicle specification, optional equipment and tolerances.

Ideal for the BMW G90 M5 Saloon

On the BMW G90 M5 Saloon, reducing the front arch gap helps create a more level side profile and makes the substantial factory wheels sit more naturally within the arches.

Importantly, the rear suspension remains untouched. This makes the kit particularly appealing to G90 owners who are already satisfied with the rear stance and don't want to lower the entire vehicle simply to address the front.

Also Designed for the BMW G99 M5 Touring

The same Eibach front spring is used across the manufacturer's G90 M5 Saloon and G99 M5 Touring applications, allowing this special front-only kit to work with both body styles.

This is particularly useful because the complete G90 and G99 spring kits are otherwise vehicle-specific due to their differing rear-axle requirements.

With this package, G99 owners can address the larger front wheel arch gap while retaining the Touring's original rear springs and factory rear ride height.

Retains the Factory BMW Dampers

These Eibach Pro-Kit springs are designed for use with the original BMW suspension dampers, meaning there's no need to replace the complete suspension system simply to achieve the desired reduction in front ride height.

This makes them a significantly simpler option than fitting a full coilover suspension if your main objective is correcting the G90 or G99 M5's factory stance.

The vehicle's original rear suspension is left unchanged.

Eibach Pro-Kit Spring Technology

Eibach is one of the world's best-known suspension manufacturers, supplying spring and suspension technology across road cars, performance vehicles and competition applications.

The Eibach Pro-Kit range is designed to provide a carefully engineered reduction in ride height while working with compatible original dampers.

Spring characteristics are developed around the specific vehicle application rather than simply focusing on achieving the largest possible drop.

For this application, Eibach's engineering team specifically considered the relationship between the Pro-Kit front springs and standard BMW rear springs before advising that the front-only configuration should not present a handling issue.

Front Springs vs Full Lowering Spring Kit

This front-only package is specifically aimed at G90 and G99 owners who want to correct the larger front wheel arch gap without lowering the rear.

If you want to lower the entire vehicle, Eibach also produces complete, vehicle-specific spring packages for the G90 M5 and G99 M5 Touring.

The front-only kit is the better choice if your priority is:

• Reducing the larger front wheel arch gap
• Achieving a more level-looking stance
• Retaining the factory rear ride height
• Keeping the original rear springs
• Avoiding unnecessary additional lowering at the rear

For owners wanting a lower stance across the entire car, a complete four-spring kit or height-adjustable suspension solution may be more appropriate.

Compatibility

Compatible with:

• BMW G90 M5 Saloon
• BMW G99 M5 Touring

Designed for the latest-generation M5 Plug-in Hybrid with M xDrive.

The package contains the common Eibach front springs used across the G90 and G99 applications.

Product Specifications

Manufacturer: Eibach
Product Range: Pro-Kit
Part Number: E10-20-059-01-20-UK
Application: BMW G90 M5 & G99 M5 Touring
Front Lowering: Approximately 20mm
Rear Lowering: None – factory rear springs retained
Kit Contents: 2x front lowering springs
Front Dampers: Factory BMW dampers retained
Rear Suspension: Remains factory specification
Configuration: Special front-axle-only kit

What's Included?

The package contains:

• 2x Eibach Pro-Kit front lowering springs

This is deliberately a front-only spring kit. Rear lowering springs are not included because the purpose of this package is to reduce the larger front arch gap while maintaining the standard BMW rear ride height.

Professional installation is recommended, followed by a suspension geometry check/alignment once the springs have settled.

Why Choose Eibach?

Eibach has decades of experience developing high-performance suspension components and is one of the most established names in aftermarket lowering springs.

For the latest M5, the key advantage is that this front-only configuration has been considered by Eibach's own engineering team, rather than simply being created by splitting a conventional lowering kit.

You benefit from:

• Genuine Eibach Pro-Kit springs
• Vehicle-specific spring development
• Approximately 20mm targeted front lowering
• Compatibility with the factory dampers
• A solution specifically aimed at the G90/G99's larger front arch gap
• Eibach engineering expertise and manufacturing quality

Why Buy From R44 Performance?

R44 Performance specialises in BMW suspension, performance parts and modifications, with extensive experience developing and sourcing upgrades for the latest BMW M platforms.

This particular G90/G99 M5 front spring package was created following direct communication with Eibach, specifically exploring whether a front-only solution could address the factory stance without compromising the intended suspension balance.

When you purchase your Eibach G90/G99 M5 front springs from R44 Performance, you'll benefit from:

• Genuine Eibach suspension components
• Special front-only G90/G99 M5 package
• Directly developed through discussions with Eibach
• Specialist BMW G90 and G99 M5 product knowledge
• Expert suspension and fitment support
• Extensive range of complementary M5 upgrades
• Fast UK and worldwide shipping
• Dedicated support before and after your purchase

If the larger front wheel arch gap is the one thing bothering you about the factory stance of your new M5, the Eibach BMW G90 & G99 M5 Pro-Kit Front Lowering Springs offer a targeted solution: approximately 20mm of front lowering while leaving the rear ride height exactly where BMW intended it.