VRSF N55 6.5" HD Intercooler Upgrade Kit for 12-18 F20 & F30 228i, M235i, M2, 328i, 335i, 428i, 435i N20 N26 N47

Replace your inefficient factory intercooler with a VRSF upgraded intercooler kit to get the most out of your N20, N26 & N55 BMW. Our intercoolers are designed to be the best performing, direct bolt-on intercoolers available for your BMW with special attention to quality and performance while maintaining a reasonable price. Each VRSF intercooler includes our proprietary High-Density fin pack which results in higher HP gains compared to the other guys, mainly due to our incredibly dense internal and external fin pack. Our core was engineered to offer a greater overall surface area for increased heat absorption as well as dissipation.

VRSF HD Intercooler Core

The most important component of any intercooler is the core. The core cools the charged air from the turbo before it enters the engine and the OEM BMW tube and fin intercooler is designed to support low boost levels and airflow. When tuned, airflow and boost levels are increased significantly. This causes the OEM intercooler to heat soak and reduces HP and increases the chance of pre-detonation.

We remedy this problem with our proprietary, high-density bar and plate intercooler core which utilizes a staggered and offset internal and external fin pack. The VRSF HD core has been carefully balanced to provide the best intake temperature reduction while maintaining minimal pressure drop. The VRSF HD core is also much more durable than the OEM tube and fin core, with a better ability to withstand rocks and other debris.

The VRSF 5″ Performance HD & 6.5″ Competition HD Intercoolers are comprised of an incredibly dense fin pack both internally and externally. It’s not uncommon to see intake temperatures drop at the end of a 3rd gear pull due to the larger overall internal and external surface area. You can expect to see an intake temperature reduction on a stock turbo, full bolt-on car during a 3rd gear pull which is why the VRSF HD is THE best option for your N55. Please note that the HD fin pack is now standard at no extra charge! The VRSF 5″ Performance HD is capable of supporting up to 600whp whereas the 6.5″ Competition HD is capable of supporting up to 800whp.

Installation & Construction

We include everything required to replace the OEM intercooler. All VRSF intercoolers feature tabs that allow the retention of the factory fan shroud and our CFD optimized cast end tanks are designed to work with both the OEM intercooler piping as well as any aftermarket charge pipe that adapts to the OEM FMIC. After each intercooler is pressure tested, we then apply a thermal dispersant coating which ensures a leak-free experience along with superior protection against the elements. Our intercoolers fit both Left Hand Drive (LHD) & Right Hand Drive (RHD) Models as well as all XI models.

PRODUCT SPECIFICATION

• Proprietary VRSF HD bar & plate core.
• CFD optimized cast end tanks.
• 87% larger than the OEM intercooler.
• Quick and easy install (less than 1.5 hours)
• Compatible with both OEM and aftermarket charge pipes.
• Thermal heat dispersant for added durability.
• Includes lifetime warranty

COMPATIBILITY

Unless explicitly stated otherwise, all products sold by R44 Performance Limited are designated RACE ONLY and are solely for competition or off-road use limited to racing formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, may violate local, state, and Federal laws. R44 Performance Limited does not implicitly or explicitly confirm the legality of using any products it sells on public roads; that is entirely the responsibility of the consumer.

It is the responsibility of the customer to check with all federal, state local and environmental laws before ordering and installing a product. R44 Performance Limited is not responsible for any fees, fines or costs that a customer may incur as a result of failing to check with federal, state, local or environmental laws before ordering and installing a product.

We get a large number of custom orders and requests everyday, so as a result it is not always possible for us to keep every item in stock at all times in our warehouse. If you require the item urgently please contact our sales team here to check the stock before you make your purchase.

We totally understand if you're not certain a part will be compatible with your car, so we highly recommend contacting us here with your query. Our friendly sales team will then be in touch to confirm if this part is the correct part you are looking for.

All in stock products ship the same day if ordered before 2pm GMT

For out of stock items we will contact you with an estimated wait time if not otherwise specified above.

We offer worldwide shipping on all products. If upon receiving your product you wish to return; we offer a 30-day returns policy. For our in-depth returns information please follow the link. "R44 Returns Policy

All of our products come with a standard warranty of 1-3 years. This is dependant on the type of product however. For more details please see our warranty page here.