{"product_id":"mhc-bmw-f87-m2-m2-competition-gtx-adjustable-front-aero-add-on-pre-preg-carbon-fibre","title":"MHC+ BMW F87 M2 \u0026 M2 Competition GTX Adjustable Front Aero Add On In Pre Preg Carbon Fibre","description":"\u003cp\u003eTake your GTX front end further with the \u003cstrong\u003eMHC+ GTX Adjustable Front Aero Add On for the F87 M2 \u0026amp; M2 Competition\u003c\/strong\u003e, the adjustable lower section of the two-piece GTX front splitter system. Manufactured from 100% pre-preg (“dry”) carbon fibre, it mounts to the GTX front splitter and extends the front aero a further \u003cstrong\u003e20–50mm\u003c\/strong\u003e forward, letting you set front-end aggression and aerodynamic balance exactly where you want it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e this is an add-on. The \u003cstrong\u003eMHC+ GTX Front Splitter (M2 N55 or M2 Competition S55 version)\u003c\/strong\u003e is required and is sold separately, or buy both together as part of the complete MHC+ GTX Aero Kit.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable lower add-on for the MHC+ GTX front splitter\u003c\/li\u003e\n\u003cli\u003eDesigned for the BMW F87 M2 \u0026amp; M2 Competition\u003c\/li\u003e\n\u003cli\u003eRequires the MHC+ GTX Front Splitter (M2 N55 or M2 Competition S55 version) (sold separately)\u003c\/li\u003e\n\u003cli\u003eAdjustable 20–50mm forward extension\u003c\/li\u003e\n\u003cli\u003eManufactured from 100% pre-preg (“dry”) carbon fibre\u003c\/li\u003e\n\u003cli\u003eOEM-style 2x2 twill carbon weave\u003c\/li\u003e\n\u003cli\u003eDeep high-gloss UV-resistant lacquer finish\u003c\/li\u003e\n\u003cli\u003eDedicated captive mounting system using supplied billets and M6 hardware\u003c\/li\u003e\n\u003cli\u003eRequires removal of the front bumper to fit\u003c\/li\u003e\n\u003cli\u003eBacked by MHC LDN’s 3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAdjustable Motorsport Aero\u003c\/h3\u003e\n\u003cp\u003eThe lower section extends the splitter approximately \u003cstrong\u003e20–50mm further forward\u003c\/strong\u003e, allowing owners to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncrease front-end aggression\u003c\/li\u003e\n\u003cli\u003eFine-tune aerodynamic balance\u003c\/li\u003e\n\u003cli\u003eCreate a more track-inspired appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA dedicated captive mounting system isolates aerodynamic load from the bumper itself, improving structural integrity under high-speed use. Set the amount of protrusion at the trial-fit stage, before anything is committed.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eAdd It Now or Add It Later\u003c\/h3\u003e\n\u003cp\u003eThe GTX system is modular by design. Whether you bought your splitter last week or last year, the mounting provision is already there – this add-on bolts straight to it with the supplied billets, threaded uppers and M6 hardware. Nothing on the original splitter needs modifying.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eFitment \u0026amp; Installation\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFits using:\u003c\/strong\u003e supplied fitting billets, bonded threaded uppers and M6 nuts and bolts, plus pre-applied automotive-grade adhesive tape\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTools required\u003c\/strong\u003e – items marked (supplied) are included in the box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrill\u003c\/li\u003e\n\u003cli\u003e6.5mm drill bit (supplied) – lower mounting holes\u003c\/li\u003e\n\u003cli\u003e2.5mm drill bit (supplied)\u003c\/li\u003e\n\u003cli\u003ePZ2 driver bit (supplied)\u003c\/li\u003e\n\u003cli\u003e10mm socket and 10mm spanner – M6 hardware\u003c\/li\u003e\n\u003cli\u003ePanel wipe or IPA and lint-free cloths (alcohol wipes supplied)\u003c\/li\u003e\n\u003cli\u003eMasking tape\u003c\/li\u003e\n\u003cli\u003eTrim removal tools\u003c\/li\u003e\n\u003cli\u003eRamps, or a jack and axle stands\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eTime to fit:\u003c\/strong\u003e 90 minutes (complete splitter assembly, bumper off)\u003cbr\u003e\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Moderate – drilling and bumper removal required\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequires removal of the front bumper to fit.\u003c\/strong\u003e The bumper comes off with the upper splitter attached, the assembly is built up on the bench, then the whole thing goes back on the car.\u003c\/p\u003e\n\u003cp\u003eThe 90 minutes covers the full job including bumper removal and refitting.\u003c\/p\u003e\n\u003cp\u003eAll required fixings and consumables are supplied. Best fitted indoors, above 15°C, on a clean, dry car – trial fit before committing any adhesive tape. A full step-by-step GTX fitting guide is available, and professional installation is recommended for the best possible result.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePrecision OEM-Level Fitment\u003c\/h3\u003e\n\u003cp\u003eMHC+ developed this component using:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull 3D scans of the BMW F87 chassis\u003c\/li\u003e\n\u003cli\u003eAdvanced CAD modelling and engineering\u003c\/li\u003e\n\u003cli\u003eOEM-level panel alignment development\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis ensures flush integration with the factory body lines, accurate panel alignment and OEM-style fitment quality. No cutting or compromise required.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003ePremium Pre-Preg Carbon Fibre Construction\u003c\/h3\u003e\n\u003cp\u003eUnlike conventional wet carbon fibre products, MHC+ uses genuine \u003cstrong\u003epre-preg (“dry”) carbon fibre\u003c\/strong\u003e, delivering:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased strength and rigidity\u003c\/li\u003e\n\u003cli\u003eReduced overall weight\u003c\/li\u003e\n\u003cli\u003eSuperior weave consistency\u003c\/li\u003e\n\u003cli\u003eMinimal imperfections or air pockets\u003c\/li\u003e\n\u003cli\u003eExceptional long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach component is cured under controlled heat and pressure to achieve optimal resin saturation, producing a premium carbon fibre part suitable for high-end BMW builds.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDeep High-Gloss Finish\u003c\/h3\u003e\n\u003cp\u003eFinished in a premium \u003cstrong\u003eUV-stable gloss lacquer\u003c\/strong\u003e, every GTX component offers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent resistance to fading and yellowing\u003c\/li\u003e\n\u003cli\u003eA rich OEM-style appearance\u003c\/li\u003e\n\u003cli\u003eSeamless compatibility with other MHC+ carbon fibre components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSupplied Ready to Install\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFitting billets and threaded uppers\u003c\/li\u003e\n\u003cli\u003eM6 nuts and bolts\u003c\/li\u003e\n\u003cli\u003ePre-applied automotive-grade double-sided tape\u003c\/li\u003e\n\u003cli\u003e6.5mm drill bit, 2.5mm drill bit and PZ2 driver bit\u003c\/li\u003e\n\u003cli\u003eAlcohol wipes for surface preparation\u003c\/li\u003e\n\u003cli\u003eMHC LDN fitment guarantee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eRequires the MHC+ GTX front splitter to be fitted.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW F87 M2 (N55)\u003c\/li\u003e\n\u003cli\u003eBMW F87 M2 Competition (S55)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy Choose MHC+?\u003c\/h3\u003e\n\u003cp\u003eMHC+ is recognised globally for producing premium BMW carbon fibre styling upgrades with precise fitment, OEM-inspired design and exceptional manufacturing quality.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy Buy from R44 Performance?\u003c\/h3\u003e\n\u003cp\u003eR44 Performance supplies premium BMW styling and performance upgrades trusted worldwide.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBMW specialists\u003c\/li\u003e\n\u003cli\u003eGenuine high-quality carbon fibre products\u003c\/li\u003e\n\u003cli\u003eFast UK \u0026amp; international shipping\u003c\/li\u003e\n\u003cli\u003eExpert technical support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFinish your GTX front end with the \u003cstrong\u003eMHC+ GTX Adjustable Front Aero Add On\u003c\/strong\u003e, delivering adjustable motorsport aero, premium pre-preg carbon fibre construction and OEM-quality fitment for the F87 M2 platform.\u003c\/p\u003e","brand":"MHC PLUS","offers":[{"title":"Default Title","offer_id":57810198757758,"sku":"MHCP-F87-CF-FS004","price":600.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/7568\/8011\/files\/mhc-bmw-f87-m2-m2-competition-gtx-adjustable-front-aero-add-on-pre-preg-carbon-fibre-h.jpg?v=1786023411","url":"https:\/\/r44performance.com\/products\/mhc-bmw-f87-m2-m2-competition-gtx-adjustable-front-aero-add-on-pre-preg-carbon-fibre","provider":"R44 Performance","version":"1.0","type":"link"}